Ziggurat
A free stereo flanger with eight modes, from jet sweeps to an endless barber pole and sweeps that fire when you pick a note.
Free iPhone + iPad App + AUv3 No ads, no account
Coming 10 DecemberWhat it does
Ziggurat is a flanger: it sweeps a short delay against your sound, for the jet whoosh, the hollow comb and everything between. Play it on its own on iPhone or iPad, or load it as an AUv3 effect in AUM, Loopy Pro, GarageBand, Cubasis, Logic Pro for iPad or any other AUv3 host.
- ClassicThe jet sweep, with positive or negative feedback and a tone control.
- Thru-ZeroA tape-style flange that passes through zero for a deep null.
- Barber UpA sweep that rises for ever.
- Barber DownA sweep that falls for ever.
- Trigger UpEach picked note fires one rising sweep, then it holds.
- Trigger DownThe same, falling.
- StepThe delay climbs and falls in 16 steps, with glide.
- RandomRandom steps, with glide.
- Six knobs: Manual, Rate, Width, Feedback, Mix, and Modify, which changes job with the mode.
- Tap tempo, or follow the host tempo in 16 divisions from 8 bars to 1/16.
- Live plus five slots, recalled by knob, MIDI Program Change or the host's preset parameter.
- Presets with save, rename, delete and undo.
- Trigger sweeps from your playing, a sidechain or the left input. Sensitivity is a level threshold on a meter.
- Feedback character: Pedal, Warm or Grit.
- Level-matched Mix and Feedback, output trim, a gentle output clipper.
- A pixel-art desert behind the knobs follows your settings, with its own colours in every mode.
- Three layouts fit any host window. Every control is labelled for VoiceOver; Reduce Motion calms the picture.
Price
All of it is free. No in-app purchases, no ads, no account, no data collected.
About
Made by Artem at Freefall Studio, London. One person, building instruments. Full details in the manual.
iOS 13+, iPhone and iPad.
Ziggurat · © 2026 Artem Vovsia · Freefall Studio · [email protected]
Privacy policy
Last updated 2026-11-12
Ziggurat (the iOS app and its AUv3 plugin, published by Artem Vovsia / Freefall Studio) does not collect, store or transmit any personal data.
- No accounts. Nothing to sign up for.
- No analytics, no advertising, no tracking, no third-party SDKs.
- The app asks for the microphone because it is an audio effect: it processes the sound from your input. That audio is processed on your device as you play. It is never recorded by the app and never leaves the device.
- Presets you save stay on your device, in the app's own storage (and in your iCloud backup if you have backups on).
- The app and the plugin make no network requests.
If you opt in to sharing diagnostics with app developers in iOS Settings, Apple may pass anonymised crash reports to us. We use them only to fix crashes.
Questions: [email protected]
Ziggurat · © 2026 Artem Vovsia · Freefall Studio · [email protected]
Support
Ziggurat is made by one person, Artem Vovsia, in Freefall Studio.
Something broken, confusing or missing? Write to
Say which device you are on (iPhone or iPad, model, iOS version), whether you were in the app or inside a host (and which host), and what you expected to happen. Screen recordings help a lot.
No sound in the app? Allow microphone access (Settings > Privacy & Security > Microphone > Ziggurat), put headphones on, and tap Unmute Input if a yellow bar says the input is muted.
The plugin is not listed in your host? Open the Ziggurat app once, then rescan or restart the host.
More answers in the manual (section 10, Troubleshooting).
Requirements: iOS 13 or later, iPhone or iPad. The plugin needs an AUv3 host such as AUM, Loopy Pro, GarageBand, Cubasis or Logic Pro for iPad.
Ziggurat is free and has no accounts, subscriptions or in-app purchases.
Ziggurat · © 2026 Artem Vovsia · Freefall Studio · [email protected]
Manual
Ziggurat is a stereo flanger with eight modes, for iPhone and iPad. It runs as an app and as an AUv3 effect inside music apps. It is free. Version 1.0.
Ziggurat is made by one person. Questions and bug reports: [email protected]
1. Getting started
The app
- Open Ziggurat and allow the microphone. Ziggurat is an effect: it plays back what comes into your device, flanged.
- Put headphones on. A speaker next to a microphone howls. For that reason the app starts with the input muted and a yellow bar: "Audio input is muted to avoid feedback loop". With headphones on, tap Unmute Input.
- Play, sing or speak. The first sound is Classic, already flanging.
Better sound:
- Wired headphones, or an audio interface. Plug a guitar or a synth into an interface and Ziggurat processes it in stereo.
- Bluetooth headphones make iOS switch to their own microphone, which sounds thin, and they add delay. Use wired headphones.
- The app keeps running when you switch to another app. Close it from the app switcher to stop it.
The plugin (AUv3)
Open the Ziggurat app once after installing, so iOS registers the plugin. Then, in your host, add an audio effect (an insert) to a channel and pick Ziggurat (by Freefall Studio) from the Audio Unit list. Menu names differ between hosts and versions:
| Host | Where |
|---|---|
| AUM | An effect slot on an audio, file player or instrument channel → Audio Unit Extensions → Ziggurat |
| GarageBand | Track Controls → Plug-ins & EQ → Edit → an empty slot → Audio Unit Extensions → Ziggurat; tap the slot to open it |
| Logic Pro for iPad | The channel strip's Audio FX → an empty slot → Audio Units → Ziggurat |
| Cubasis | The track's Inserts → an empty slot → Audio Unit → Ziggurat |
| Loopy Pro | An effect slot on an input, a colour or a bus → Audio Unit → Ziggurat |
The plugin follows the host's tempo and transport, and the host saves its whole state with your project.
2. The screen
Ziggurat picks one of three layouts to fit the window: Full (a full screen or a large pane), Compact (a narrow or portrait pane) and Strip (a wide, short pane). The controls are the same in all three.
| Part | What it does |
|---|---|
| Header | The preset name with < > arrows, the undo arrow (only after something can be undone) and the cog (Setup) |
| MODE | The eight modes. Drag up or down on the knob. On Full, tap a mode name around it to jump there |
| SLOT + STORE | LIVE and slots 1–5. Turn the knob to recall a slot; STORE saves into one |
| Six knobs | Manual, Rate, Width, Feedback, Mix, Modify |
| Rate & Tap | Three positions: SLOW, NORM, FAST |
| ACTIVATE + LIVE LED | Effect on / off. The LED shows the output level |
| TAP / TRIGGER + SYNC LED | Tap tempo (a trigger in the Trigger modes). The LED shows tempo sync |
| Readout | A one-line display over the knobs. It shows the control you touch, then hides after a second |
| The picture | A pixel-art desert behind the controls. It follows the knobs, the sweep and the triggers |
Turning knobs
- Drag up or down. A full turn is about 250 points of travel.
- Fine control: while dragging, slide your finger sideways away from the knob. The further away, the finer: half speed from 50 points, a quarter from 100, a tenth from 150. The readout shows the factor (for example
WIDTH ×0.25). - Double-tap a knob to reset it to its default.
- Feedback stops at zero as you cross the centre; keep dragging to go past it.
- A tap on a knob shows its value in the readout and changes nothing.
- On a short Compact window the values under the knobs hide; the readout still shows the one you touch.
The picture
The background is drawn from your settings, not from the audio. Each mode has its own scene and colours: a sun that swings with the sweep (Classic), an eclipse (Thru-Zero), a sky that scrolls up or down for ever (the barber modes), a flare or a meteor that rides each trigger's sweep (the Trigger modes), stair lights (Step), a constellation (Random). Manual changes the sky's colour and its number of bands, Width the size of the movement, Feedback the rings and drips, Mix how strong the picture is. Bypassed, it goes grey and stops.
3. The knobs
| Knob | What it does |
|---|---|
| Manual | The centre of the sweep. Clockwise = a shorter delay = a higher flange (15 ms at the left end, 0.2 ms at the right) |
| Rate | The sweep speed. Reads DIVISION when synced to the host, and RISE / FALL (the time of one sweep, SLOW to FAST) in the Trigger modes |
| Width | How far the sweep travels. In the barber modes it warps the spacing of the notches instead |
| Feedback | Resonance. Right (+) = a bright, whooshing ring; left (−) = a hollow one. Centre = none |
| Mix | How much flanged signal joins the dry signal. 50 % already gives 75 % wet; 100 % = equal wet and dry, the deepest notches |
| Modify | Changes with the mode (below) |
Modify per mode
| Mode | Label | Left … right |
|---|---|---|
| Classic, Barber Up / Down | TONE | LP (darker, down to 400 Hz) … flat in the middle … HP (thinner, up to 4 kHz) |
| Thru-Zero | DRY DELAY | SHORT (0.2 ms) … LONG (15 ms). Longer = the null sits lower in the sweep |
| Trigger Up / Down | SENSITIVITY | LESS … MORE (section 6) |
| Step, Random | GLIDE | STEPS (hard jumps) … GLIDE (smooth slides) |
Rate & Tap switch. SLOW / NORM / FAST picks the Rate knob's range and multiplies a tapped tempo: ÷2, ×1, ×2.
| Range | Rate (sweep modes) | Sweep time (Trigger modes, labelled LONG / MED / SHORT) |
|---|---|---|
| SLOW | 0.02–0.6 Hz | 1–45 s |
| NORM | 0.08–3 Hz | 0.15–3 s |
| FAST | 0.5–15 Hz | 0.02–0.5 s |
4. The modes
Classic. The jet sweep: a short delay sweeping against the dry signal. Positive feedback whooshes, negative goes hollow. Modify is a tone control on the flanged signal.
Thru-Zero. A tape-style flange. The flanged signal passes through the dry one, so the sweep goes through zero and cancels into a deep null. Modify sets the dry delay. The whole output is delayed by that dry delay (0.2–15 ms): in a host, a Thru-Zero track sits that much late against the others.
Barber Up / Barber Down. A sweep that rises (or falls) for ever, without the jump back. Rate sets the speed, Width the spacing of the notches, Modify the tone.
Trigger Up / Trigger Down. Each trigger fires one sweep, then the sweep holds at its end until the next trigger. Up rises, Down falls. Rate (RISE / FALL) sets how long one sweep takes, Manual the short end of the sweep, Width how far it travels, Modify the sensitivity. See section 6.
Step. The delay climbs and falls in 16 steps. One step is a quarter of the Rate period, so tapping quarter notes gives sixteenth-note steps and one climb and fall per bar. Modify (GLIDE) smooths the steps.
Random. The delay jumps to a new random position on every step (four steps per Rate period, as in Step). The pattern repeats the same way after a reload. Modify (GLIDE) smooths the jumps.
5. Slots and presets
There are two levels. Slots are for playing: six sounds you switch between in a song. Presets are for keeping: a whole set of slots under a name.
Slots (LIVE + 1–5)
- LIVE is the knobs as they are. Slots 1–5 are stored sounds.
- A slot stores the mode, the six knobs, the Rate & Tap position, tempo sync, the tap tempo and the output trim.
- Store: tap STORE, then the slot to store into (LIVE is never a target). On a slot, STORE AGAIN stores into the same slot. The readout says
STORED IN SLOT 3. - Recall: turn the SLOT knob, or on Full tap the slot's number on the ring. MIDI Program Change and the host's Preset parameter recall slots too (section 8).
- Edited: change a knob after a recall and the slot reads
3*in red. Turn away and the edits are dropped (EDITS DISCARDED; undo brings them back). Tap the red3*on the ring to revert to the stored sound. - Slot recalls never change Spread or the feedback character.
Presets
- The preset name sits in the header.
<and>step through the presets and load each one at once. - A preset stores all six slots (with any unsaved edits in the active slot), the active slot, Spread and the feedback character.
- A red star after the name (
DEFAULT*) means the sound differs from the saved preset. - Tap the name to open the preset list. FACTORY presets (with a lock) cannot be changed; USER presets are yours. Tap a row to load it; the list stays open. Close it with × or by tapping the name again.
| Action | What it does |
|---|---|
| SAVE | Saves over the loaded user preset |
| SAVE AS | Saves under a new name |
| REVERT | Reloads the saved preset |
| INIT | Loads DEFAULT, the starting preset |
| RENAME | Renames a user preset |
| DELETE | Deletes a user preset. Tap twice within 3 seconds |
Names: up to 16 characters, letters, digits, space and - _ . & + ' ( ) ! #. Letters become upper case. A name that is taken gets a number (SLOW TIDE 2); nothing is ever overwritten by accident.
Undo
The undo arrow next to the cog takes back the last store, discarded edit or preset action (load, save, rename, delete). It stays until you use it. There is one step of undo and no redo.
6. Tempo and triggers
Tap tempo
Tap the TAP footswitch in time. Ziggurat averages up to four taps and starts again after a pause of 2.5 seconds. The Rate knob shows a TAP badge. The Rate & Tap switch multiplies the tapped tempo (÷2, ×1, ×2). Moving the Rate knob drops the tap tempo. A MIDI note does the same as a tap.
Host sync
Tap the SYNC LED (or Setup → HOST SYNC ON). The LED lights and blinks on the beat, and Rate becomes DIVISION: 16 divisions from 8 bars to 1/16, with dotted and triplet values. With the host playing, the sweep locks to the bar. A tap now sets where the sweep starts, and the sweep stays locked to the tempo from there. Tap the LED again for free tempo.
Sync is stored per slot. In the app on its own there is no host tempo, so sync runs at 120 BPM; use tap tempo there. The TAP or SYNC badge on the Rate knob opens Setup.
Triggering (Trigger Up / Trigger Down)
A trigger fires one sweep. Triggers come from:
- the audio: each hit or picked note that is loud enough (the source is set in Setup → TRIGGER SOURCE);
- the TRIGGER footswitch (the TAP footswitch is labelled TRIGGER in these modes);
- a MIDI note, or the host's Tap/Trig parameter.
Trigger source (Setup):
| Source | What triggers |
|---|---|
| INPUT | Your playing itself |
| S-CHAIN | The host's sidechain input (only in hosts that send a sidechain to effects; the app has none) |
| LEFT IN | The left input. Put the trigger signal on the left and the instrument on the right; the right channel is flanged |
Sensitivity (Modify in the Trigger modes) is a level threshold:
- 0 % = 0 dBFS (only full-scale hits trigger), 100 % = −60 dBFS. Every step between is the same number of dB: 50 % = −30 dBFS.
- While you turn it, the readout shows a meter: the bar is the trigger signal, the white tick is the threshold. A hit whose bar crosses the tick fires. The same meter is in Setup (KEY).
- Turn it down when everything triggers. Turn it up when quiet notes are missed.
- Only the attack counts. A note that is below the threshold when it starts never triggers later, even if it swells. Two triggers are always at least 40 ms apart.
- If S-CHAIN is picked and nothing reaches it, the readout says
sidechain: no signal.
7. Setup (the cog)
| Section | What it sets | Stored |
|---|---|---|
| TEMPO · HOST SYNC OFF / ON | Rate picks a division of the host tempo; Tap sets the sweep start | per slot |
| STEREO · SPREAD | How far apart the left and right sweeps run, 0–180° (90° by default) | per preset |
| OUTPUT · TRIM | The output level, −12 to +6 dB | per slot |
| TRIGGER SOURCE · KEY | INPUT / S-CHAIN / LEFT IN, and the trigger meter (section 6). Only matters in the Trigger modes | per project |
| FEEDBACK CHARACTER | What happens to the ringing signal at high Feedback: PEDAL / WARM / GRIT | per preset |
Feedback character.
- PEDAL (the default): smooth. A limiter keeps the ring in check and the range is narrower. The cleanest.
- WARM: the limiter plus gentle saturation on the peaks, with the full range of resonance.
- GRIT: clipping inside the feedback loop. The most resonance and bite; it screams at the top.
Changing it marks the preset as modified (the star). Saving the preset stores it. The factory presets use PEDAL.
The about block shows the version and build.
8. Level, bypass and MIDI
Level. Mix and Feedback are level-matched, so a deep setting stays close to the dry level. The LIVE LED shows the output: green, yellow from −6 dBFS, red from −0.3 dBFS (it stays red for a second), white when bypassed. A gentle clipper starts at −0.3 dBFS; on hot, bright peaks the output can reach +0.5 dBFS, so keep a limiter at the end of your chain, or turn TRIM down.
Bypass. Tap ACTIVATE. Hold it longer than 0.4 s and it switches back when you let go (momentary). Bypass fades over 20 ms, and the effect comes back without old echoes.
MIDI.
- Any MIDI note-on taps the tempo, or fires a trigger in the Trigger modes.
- Program Change 0 recalls LIVE, 1–5 recall slots 1–5.
- The app listens to connected MIDI devices. In a host, MIDI to an effect depends on the host. Every host can map a controller or a foot switch to the plugin's parameters: Tap/Trig (a tap or trigger on each press), Preset (the slot), Bypass, and all the knobs.
Host parameters (15): Mode, Manual, Rate, Width, Mix, Feedback, Modify, Rate Range, Bypass, Tap/Trig, Preset, Sync, Spread, Trig Src, Out Trim. The feedback character is not a parameter: it cannot be automated.
9. Accessibility
- VoiceOver reads every control. The Mode and Slot knobs are adjustable ("Mode, Classic, 1 of 8"): swipe up or down to step. Knobs read their value with units. Mode changes, stores and preset actions are announced.
- Reduce Motion (Settings → Accessibility → Motion) makes the picture nearly still and stops the blinking store frames. The SYNC LED still blinks on the beat.
- Every touch target is at least 44 points.
10. Troubleshooting
| Problem | Try |
|---|---|
| No sound in the app | Allow the microphone (Settings → Privacy & Security → Microphone → Ziggurat). Tap Unmute Input on the yellow bar. Check that ACTIVATE's LED is not white (bypassed) |
| A howl in the app | You are on the speaker. Put headphones on |
| Thin, delayed sound with AirPods or other Bluetooth headphones | iOS switched to their microphone. Use wired headphones or an audio interface |
| Ziggurat is not listed in the host | Open the Ziggurat app once, then restart the host (or rescan its plugins). If it is still missing, restart the device |
| Nothing triggers | Check the mode (Trigger Up / Down) and the trigger source. Turn Sensitivity up until the meter's tick sits left of your hits |
| Everything triggers | Turn Sensitivity down |
sidechain: no signal | The host sends nothing to the sidechain. Route a track into it, or use INPUT or LEFT IN |
| Sync does not follow | Start the host's transport. In the app on its own, sync runs at 120 BPM |
| The LIVE LED goes red | Turn TRIM down, or Mix / Feedback |
| A Thru-Zero track is late | Thru-Zero delays the whole output by its dry delay (Modify). Turn Modify left, or nudge the track earlier in the host |
| MIDI notes do nothing in a host | The host may not send MIDI to effects. Map the Tap/Trig parameter instead |
Still stuck? Write to [email protected] with your device, iOS version, the host (if any) and what happened. A screen recording helps.
Ziggurat · © 2026 Artem Vovsia · Freefall Studio · [email protected]